Create WiFi Hot-Spot in Windows 8/8.1/10 via Command Prompt

1-Open Command Prompt via run as Administrator

2-Type the command-

netsh wlan set hostednetwork mode=allow  ssid=xyz key=12345

 

netsh wlan start hostednetwork

3-For Stop Hot-Spot type this command in CMD

netsh wlan stop hostednetwork

ENJOY

ENABLE WIFI OR WIRELESS VIA COMMAND PROMPT

1- GO TO START & OPEN CMD (RUN AS ADMINISTRATOR)

2- TYPE THIS COMMAND -

netsh interface show interface

3- FOR Enable WiFi-

netsh interface set interface "Interface Name" enabled

EXAMPLE

netsh interface set interface "Wi-Fi enable" = wifi enable




4-For Disable WiFi-

netsh interface set interface "Interface Name" disable

Example-

netsh interface set interface "Wi-Fi disable" = wifi disable







ENJOY







BIOS SETTING FOR BOOTING 

FOR BIOS SETTING POWER ON COMPUTER & PRESS DEL , F2 , F10 , F4 OR ESC BUTTON

EVERY SYSTEM HAVE DIFFERENT BIOS SOFTWARE OR BIOS SETUP KEY 

AFTER ENTERING BIOS GO TO BOOT SETTING OR BOOT ORDER OR BOOT PRIORITY OR BOOT SEQUENCE OR   BOOT OR STARTUP OR STARTUP SEQUENCE 

AND SELECT 1ST BOOT DEVICE - CD/DVD OR USB OR NETWORK 

AND SELECT 2ND BOOT DEVICE - HDD (HARD DISK) 

PRESS F10 OR F4 FOR SAVE THE BIOS SETTING. 

ENJOY

Installation of Windows 7 with Figure

First Go To Bios Setting (Del or F2) And Set Boot Device Like--

1st boot CD/DVD or USB or Network

2nd boot to your Harddisk and press F4 or F10 for save and exit.

WINDOWS XP-2 (SERVICE PACK 2 ) INSTALLATION 

First Go To Bios Setting (Del or F2) And Set Boot Device Like--

1st boot CD/DVD or USB or Network

2nd boot to your Harddisk and press F4 or F10 for save and exit.

 AFTER CONFIGURATION WAIT SOME TIME 

AND THESE SCREEN APPEAR

THANKS FOR VISIT THIS BLOG