Nokia Cell Phone Secret Codes

Codes :

1) *#06# For checking IMEI(international Mobile Equipment Identity)
2) *#7780# Reset to factory settings
3) *#0000# To view software version
4) *#2820# Bluetooth device address
5) *#746025625# Sim clock allowed status
6) #pw+1234567890+1# Shows if ur sim as any restrictions

Add Your Name (or) Application to right click Of My Computer

To write your name on right click application
please follow the steps.1.Copy/Paste the following code in Notepad And then Save it as .reg 

Windows Registry Editor Version 5.00 
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor] 
@="Your Name Or Name of the Application" 
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command] 
@="Location Of The Application"

2.Now edit it and then Type your name In 

Eg:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor] 
@="Rajesh" 

3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In: 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command] 
@="Location Of The Application"

For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .

How to "Delete administrator Password" without any software

How to "Delete administrator Password" without any software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log 
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer -

All (Ctrl+Alt+Del) Permanently deleted files Recovery solution

All (Ctrl+Alt+Del) Permanently deleted files Recovery solution

Sometimes we delete the files permanently, and realize that deleting them is like a Blunder...For all those folks,Here is the solution

Software called "Kissass Undelete" , can bring those files from the hard disk or your flash drive.

Conditions : Only if the data on that drive is not re-occupied(or written). that means the space which was available after the deletion is not been occupied after the deletion.

Click Here to download the .

1)To start searching for the files,

Select the drive from the Left panel of the Windows and Click the scan button.

the Scan might take upto 10 secs.

2)When the files search has been completed, it will show you the results with the name, typ, size and the last modified date of the searched file.

3) Now you can select the file to be recover. This is an Open source application and available for All Windows OS(Windows XP/Vista/ 7).

How do a quick back up for SQL Server 2005

Here is the syntax to quickly backup a database in SQL Server 2005.

Backup database [database name] to disk=’path where you want the file.bak’

Eg:-

backup database CRM_MSCRM to disk=’c:\crmbackup_rakesh.bak’

You can make the backup command to a completely different level but this is a quick tip on just getting a backup to perform some quick maintenance.

Run Programs at Startup without using Startup folder

This tweak allows a program to be launched when the user logs onto the computer. It can be set to run minimized and there is no trace of the executable in the Startup folder on the Start Menu nor in the Documents and Settings folder accessible via Windows Explorer. 

1. Click Start, click Run, and type regedit to run Registry Editor. Navigate to-   

HKEY_CURRENT_USER\Software\Microsoft \Windows\CurrentVersion\Run

2. Modify/Create the Value Data Type(s) and Value Name(s) as given below:

Data Type: REG_SZ [String Value]
Value Name: [Enter the Name of Program Executable]
Value Data: [Enter the Path to the Program Executable]

3. Exit Registry and Reboot.

1. Windows 7 & Windows 8 Problem Steps Recorder
   1.Open Problem Steps Recorder by clicking the Start button , and then typing psr. In the list of results, click psr.
2. Click Start Record. On your computer, go through the steps on your computer to reproduce the problem. You can pause the recording at any time, and then resume it later.
3. Click Stop Record.
4. In the Save As dialog box, type a name for the file, and then click Save (the file is saved with the .zip file name extension).
   To view the record of the steps you recorded, open the .zip file you just saved, and then double-click the file. The document will open in your browser.
   
   
   
   
   

Funny Shotting Videos 






click here-

http://www.youtube.com/watch?feature=player_embedded&v=-EVqT3XEzss

Windows IP Utilities

Windows IP Utilities

1. PING

PING is a simple application (command) used to determine whether a host is online and available. PING command sends one or more ICMP Echo messages to a specified host requesting a reply. The receiver (Target Host) responds to this ICMP Echo message and returns it back to the sender. This confirms that the Host is online and available. Otherwise the host is said to be unavailable.

Syntax:
C:\>ping gohacking.com

 

2. TELNET

Telnet command is used to connect to a desired host on a specified port number. For example

Syntax:
C:\>telnet yahoo.com 25
C:\>telnet yahoo.com

 

NOTE: The default port number is 23. When the port number is not specified the default number is assumed.

 

Telnet Hacking is explained in detail in the following post.
How To Send Fake Email

 

3. NSLOOKUP

Many times we think about finding out the IP address of a given site. Say for example google.com, yahoo.com, microsoft.com etc. But how to do this? For this there are some websites that can be used to find out the IP address of a given site. But in Windows we have an inbuilt tool to do this job for us. It is nslookup. Yes this tool can be used for resolving a given domain name into it’s IP address (determine the IP of a given site name). Not only this it can also be used for reverse IP lookup. That is if the IP address is given it determines the corresponding domain name for that IP address.

Syntax:
C:\>nslookup google.com

 

4. NETSTAT

The netstat command can be used to display the current TCP/IP network connections. For example the following netstat command displays all connections and their corresponding listening port numbers.

Eg: C:\>netstat -a

 

This command can be used to determine the IP address/Host names of all the applications connected to your computer. If a hacker is connected to your system even the hacker’s IP is displayed. So the netstat command can be used to get an idea of all the active connections to a given system.

How to Change the ICON of an EXE file

How to Change the ICON of an EXE file

I’ll give you a step-by-step instruction on how to use this tool to change the icon.

1. Goto www.shelllabs.com and download the trial version of Icon Changer and install it (Works on both XP and Vista).

2. Right-click on the exe file whose ICON is to be changed.

3. Now you will see the option Change Icon. Click on that option.

4. Now the Icon Changer program will open up.

5. Icon changer will search for all the ICONS on your system so that you can select any one of those.

6. Now select the ICON of your choice and click on SET.

7. Now a popup window will appear and ask you to select from either of these two options.

• Change embeded icon.
• Adjust Windows to display custom icon.

Select the first option (Change embeded icon).

8. You are done. The ICON get’s changed.